M-100 Message Board
M-100 Message Board
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 M-100 Message Forum
 6.3
 Throttlebody Water Fittings Question
 Forum Locked
 Printer Friendly
Previous Page
Author  Topic Next Topic
Page: of 2

6.3Nut

USA
224 Posts

Posted - 03/15/2019 :  00:18:54  Show Profile
Thanks for the part number. One thing, can anyone tell me how to adjust the throttle screw (000 990 27 20), I had noted the number of turns to extract and installed length on a piece of paper which got misplaced?

There cars and then there are BABIES!
1969 Euro Model
10901812000931
Go to Top of Page

abl567

Australia
933 Posts

Posted - 03/15/2019 :  02:18:37  Show Profile  Visit abl567's Homepage
From memory it is 2.5 turns out from seated. The clever will correct me

300SEL
6.3 #2723, my first classic Benz
3.5 #8659, my second.
2 to go...
Go to Top of Page

james lawson

USA
1358 Posts

Posted - 03/15/2019 :  10:35:40  Show Profile
If nothing else was changed in the linkage or pump, set the idle to 550-600 RPMS with it. Which is typically 2 1/2.

jim
Go to Top of Page

6.3Nut

USA
224 Posts

Posted - 03/16/2019 :  21:59:31  Show Profile
Thanks guys

There cars and then there are BABIES!
1969 Euro Model
10901812000931
Go to Top of Page
Page: of 2  Topic Next Topic  
Previous Page
 Forum Locked
 Printer Friendly
Jump To:
M-100 Message Board © 2002-2015 International M-100 Group, Inc. Go To Top Of Page
This page was generated in 3 seconds. Powered By: Snitz Forums 2000 Version 3.4.06